Grandstream GRP2612 setup: default password, IP, reset
Set up a Grandstream GRP2612 with Tonet: the default password (on the sticker), its IP address, your SIP details, STUN, and how to factory reset it.
The GRP2612 has a 2.4-inch color screen and 4 line keys. Its web page signs in as admin, with the password printed on the sticker on the back of the phone. You set it up from that web page, on a computer on the same network.
What you need
- The phone, connected to your router or network switch with a network cable.
- Power: the plain GRP2612 needs its power adapter. The GRP2612P, GRP2612W and GRP2612G can also take power from the network cable (PoE).
- The GRP2612 has no Wi-Fi. The GRP2612W does.
- A computer on the same network.
- The person's SIP details: User Name, Password and Domain.
Find the GRP2612 IP address
While the phone is idle, press and hold the Up arrow key for 3 seconds. The screen shows the IP address. You can also go to Menu › Status › Network Status.
GRP2612 default password
The username is admin. The password is printed on the sticker on the back of the phone. (Grandstream's guide also lists admin as a default, so try it if there's no sticker.) The first time you sign in, the phone makes you set a new admin password, 6 to 25 characters long.
- On the computer, open a browser and type the phone's IP address in the address bar, like
192.168.1.50. - Sign in as admin with the password from the sticker.
- Set a new admin password when asked, and write it down.
No sticker, or can't read it? On firmware 1.0.13.21 or later, click Login from LCD on the sign-in page. Type the code it shows into the phone, then choose AdminLogin.
Lost the new password? Factory reset the phone. It goes back to the default password.
Enter your Tonet line
- On the phone's web page, go to Accounts › Account 1 › General Settings.
- Fill in:
| Field | Enter |
|---|---|
| Account Active | Yes |
| Account Name | What the phone screen shows for this line, like the person's name |
| SIP Server | The whole Domain, including the colon and port, like pbx.example.com:5080 |
| SIP User ID | The User Name from SIP Information |
| SIP Authentication ID | The User Name from SIP Information |
| SIP Authentication Password | The Password from SIP Information |
| Name | The person's name |
- Click Save and Apply.
Turn on STUN
- Go to Phone Settings › General Settings. In STUN Server, enter
stun.tonet.ai:3478. Click Save and Apply. - Go to Accounts › Account 1 › Network Settings. Set NAT Traversal to STUN. Click Save and Apply.
Check that it registered
- On the web page, Status › Account Status shows the account's SIP Registration.
- On the phone, the line key shows a green handset when registered, and a gray handset with a line through it when not registered.
- On the phone, you can also go to Menu › Status › Account Status.
Not registered? See Register Failed.
Factory reset the GRP2612
A factory reset erases every setting on the phone, including your line.
From the phone's menu: go to Menu › System and select Operations - Factory Reset. Press Yes to confirm. The phone may ask for the admin password first.
With the keypad while it starts up: restart the phone and, while it's booting, press and hold 1 and 9. In the menu that appears, pick Factory Reset with the arrow keys and press Submit.
From the web page: go to Maintenance › Upgrade and Provisioning, open Advanced Settings, and click Start next to Factory reset.
Update the firmware
- Download the GRP261x firmware from grandstream.com/support/firmware.
- On the phone's web page, go to Maintenance › Upgrade and Provisioning › Firmware.
- Under Upgrade via Manually Upload, use Upload Firmware File to Update to pick the file. The upgrade starts once it's uploaded.
Phones on firmware 1.0.13.127 or older must install Grandstream's transition firmware before 1.0.15; it comes in the 1.0.15 download. Phones with hardware version 1.x (the part number on the back label looks like 962-NNNNN-1NN) can't take 1.0.15 at all and stay on 1.0.13.127. Read Grandstream's release notes before you upgrade an older phone.
Problems?
Next step
Set up the next person's phone, or see the desk phones Tonet sells at tonet.ai/desk-phones.
T26P (older)
Set up an older Yealink T26P with Tonet: find its IP address, sign in (default admin / admin), enter your SIP details with STUN, and factory reset it.
HT801 / HT802 adapter
Connect analog phones to Tonet with an HT801 or HT802: hear its IP (dial *** then 02), the default password (V2: on the sticker), STUN and factory reset.