Yealink T33G setup: IP address, default password, reset
Set up a Yealink T33G with Tonet: find its IP address, sign in (default admin / admin), enter your SIP details, turn on STUN, and factory reset it.
The T33G has a 2.4-inch color screen and 4 line keys. You set it up from its web page, on a computer on the same network. The web page's default sign-in is admin / admin.
Bought your T33G from Tonet? It arrives with your line already loaded. Plug it in and go to Check that it registered.
What you need
- The phone, connected to your router or network switch with a network cable. It takes power from the cable (PoE) or from a Yealink power adapter. The T33G has no Wi-Fi.
- A computer on the same network.
- The person's SIP details: User Name, Password and Domain.
Find the T33G IP address
Press OK on the phone while it's idle. The status screen shows the IP address. You can also go to Menu › Status.
T33G default admin password
The username is admin and the password is admin. Current firmware makes you choose a new password the first time you sign in, and again after a factory reset.
- On the computer, open a browser and go to
https://followed by the phone's IP address, likehttps://192.168.1.50. - If the browser warns that the connection isn't private, click Advanced, then continue to the address.
- Sign in with admin and admin.
- If asked, set a new password and write it down. It needs at least 8 characters and at least three of these: lowercase letters, uppercase letters, numbers, symbols. No more than 3 of the same character in a row, and it can't be the username.
admin doesn't work? The password was changed. A factory reset sets it back to admin. If the phone came from another provider, it may run that provider's own firmware and password: Yealink says to ask that provider. If admin still fails after a reset, follow Yealink's password reset and recovery steps.
Enter your Tonet line
- On the phone's web page, go to Account › Register. In the Account list, pick Account 1.
- Fill in:
| Field | Enter |
|---|---|
| Line Active | Enabled |
| Label | What the phone screen shows for this line, like the person's name |
| Display Name | The person's name |
| Register Name | The User Name from SIP Information |
| User Name | The User Name from SIP Information |
| Password | The Password from SIP Information |
| Server Host (under SIP Server 1) | The Domain, up to the colon |
| Port (under SIP Server 1) | The number after the colon in Domain |
- Click Confirm.
For example, if Domain shows pbx.example.com:5080, enter pbx.example.com in Server Host and 5080 in Port.
Turn on STUN
- Go to Network › NAT. Under STUN, set Active to Enabled. Enter
stun.tonet.aiin STUN Server and3478in STUN Port. Click Confirm. - Go to Account › Register, pick Account 1, and set NAT to STUN. Click Confirm.
The account's NAT setting only works once STUN is active in Network › NAT.
Check that it registered
- On the web page, Account › Register shows Register Status. It should say Registered.
- On the phone, the line's icon is green when registered, yellow while registering, and gray if registration failed.
Not registered after a minute? See Register Failed.
Factory reset the T33G
A factory reset erases every setting on the phone, including your line, and sets the admin password back to admin.
From the phone:
- Press and hold OK while the phone is idle. When it asks Reset to factory setting?, select OK.
- Or go to Menu › Advanced › Reset Config › Reset to Factory Settings and select OK. Advanced asks for the admin password.
From the web page: go to Settings › Upgrade and click Reset to Factory. Click OK to confirm.
The reset takes a few minutes. Don't unplug the phone until it has started up again.
Update the firmware
- Download the T33G's latest firmware from support.yealink.com: find the phone, then its Firmware & Release Note section. The file ends in
.rom. - On the phone's web page, go to Settings › Upgrade › Upgrade Firmware, pick the file, and start the upgrade.
- Don't close the browser or unplug the phone until it restarts.
Going from version 86 to version 87 firmware (124.86 to 124.87) on the web page fails with ROM invalid. Install 124.86.0.118 first, then version 87. Once on version 87, the phone can't go back to 86.
Problems?
Next step
Set up the next person's phone, or see the desk phones Tonet sells at tonet.ai/desk-phones.
Overview
Find your SIP details (User Name, Password, Domain, STUN) in Manage › Users, then follow the setup guide for your Yealink or Grandstream phone.
T46U
Set up a Yealink T46U with Tonet: find its IP address, sign in (default admin / admin), enter your SIP details, turn on STUN, and factory reset it.