Yealink

Yealink T46U setup: IP address, default password, reset

Set up a Yealink T46U with Tonet: find its IP address, sign in (default admin / admin), enter your SIP details, turn on STUN, and factory reset it.

Last updated on

The T46U has a 4.3-inch color screen, 10 line keys and two USB ports. You set it up from its web page, on a computer on the same network. The web page's default sign-in is admin / admin.

What you need

  • The phone, connected to your router or network switch with a network cable. It takes power from the cable (PoE) or from a Yealink power adapter. The T46U has no Wi-Fi of its own; Yealink's WF40 or WF50 USB adapter adds it.
  • A computer on the same network.
  • The person's SIP details: User Name, Password and Domain.

Find the T46U IP address

Press OK on the phone while it's idle. The status screen shows the IP address. You can also go to Menu › Status.

T46U default admin password

The username is admin and the password is admin. Current firmware makes you choose a new password the first time you sign in, and again after a factory reset.

  1. On the computer, open a browser and go to https:// followed by the phone's IP address, like https://192.168.1.50.
  2. If the browser warns that the connection isn't private, click Advanced, then continue to the address.
  3. Sign in with admin and admin.
  4. If asked, set a new password and write it down. It needs at least 8 characters and at least three of these: lowercase letters, uppercase letters, numbers, symbols. No more than 3 of the same character in a row, and it can't be the username.

admin doesn't work? The password was changed. A factory reset sets it back to admin. If the phone came from another provider, it may run that provider's own firmware and password: Yealink says to ask that provider. If admin still fails after a reset, follow Yealink's password reset and recovery steps.

Enter your Tonet line

  1. On the phone's web page, go to Account › Register. In the Account list, pick Account 1.
  2. Fill in:
FieldEnter
Line ActiveEnabled
LabelWhat the phone screen shows for this line, like the person's name
Display NameThe person's name
Register NameThe User Name from SIP Information
User NameThe User Name from SIP Information
PasswordThe Password from SIP Information
Server Host (under SIP Server 1)The Domain, up to the colon
Port (under SIP Server 1)The number after the colon in Domain
  1. Click Confirm.

For example, if Domain shows pbx.example.com:5080, enter pbx.example.com in Server Host and 5080 in Port.

Turn on STUN

  1. Go to Network › NAT. Under STUN, set Active to Enabled. Enter stun.tonet.ai in STUN Server and 3478 in STUN Port. Click Confirm.
  2. Go to Account › Register, pick Account 1, and set NAT to STUN. Click Confirm.

The account's NAT setting only works once STUN is active in Network › NAT.

Check that it registered

  • On the web page, Account › Register shows Register Status. It should say Registered.
  • On the phone, the line's icon is green when registered, yellow while registering, and gray if registration failed.

Not registered after a minute? See Register Failed.

Factory reset the T46U

A factory reset erases every setting on the phone, including your line, and sets the admin password back to admin.

From the phone:

  • Press and hold OK while the phone is idle. When it asks Reset to factory setting?, select OK.
  • Or go to Menu › Advanced › Reset Config › Reset to Factory Settings and select OK. Advanced asks for the admin password.

From the web page: go to Settings › Upgrade and click Reset to Factory. Click OK to confirm.

The reset takes a few minutes. Don't unplug the phone until it has started up again.

Update the firmware

  1. Download the T46U's latest firmware from support.yealink.com: find the phone, then its Firmware & Release Note section. The file ends in .rom.
  2. On the phone's web page, go to Settings › Upgrade › Upgrade Firmware, pick the file, and start the upgrade.
  3. Don't close the browser or unplug the phone until it restarts.

Going from version 86 to version 87 firmware (108.86 to 108.87) on the web page fails with ROM invalid. Install 108.86.0.118 first, then version 87. Once on version 87, the phone can't go back to 86.

Problems?

Next step

Set up the next person's phone, or see the desk phones Tonet sells at tonet.ai/desk-phones.

On this page